This article will cover the steps you need to take to factory reset your robot mower.


TABLE OF CONTENTS


How to Factory Reset

If the mower does not seem to be functioning correctly, it is advisable to reset to factory settings: 

Note: The Robot Mower must stand on a flat surface, because the inclination sensors are also zeroed.  

 

SA500ECOSA650ECOSA900ECO & X-series: 

  1. Switch OFF the device.  
  2. Place Robot mower on flat, even surface.  
  3. While pressing and holding the START button, switch ON the device.  
  4. The Robot mower will boot up. All LEDs flash.  
  5. Release START button. Factory reset is complete. 

Compact & NX series: 

  1. Place Robot mower on flat, even surface.  
  2. Switch on the device. 
  3. Press and hold the time selector key for 3 to 5 seconds until you hear a beep. 
  4. Factory reset is now complete.