This article will cover the issues you may be experiencing when trying to lubricate your chainsaw.
- Please check the level of the chain oil and ensure you are using chain lubricating oil.
- Please check that there are no oil leaks.
- If there are any leaks, please contact the customer support helpline.
To check your chainsaw is getting lubricated correctly, hold the machine at a 45 degree angle to the ground, and run it. Oil should spit out and leave a trace on the ground.
If no oil is getting through, then there could be a blockage in the oil-lines. Please contact our helpline or email us and we will advise further.