This article will cover the errors you may find displayed on your robot mower.
TABLE OF CONTENTS
- The LED on the above button is flashing red rapidly and or no input is possible.
- The LED on the above button is flashing blue and the robot returns to the station.
- The LED is red because the robot thinks it is off the ground.
- The LED is red and the mower returns to the station.
- Related articles
The LED on the above button is flashing red rapidly and or no input is possible.
- If you have never changed the PIN number, press the button 4 times (this is default).
- The LED should turn off and the mower should unlock.
- If you have set a PIN number, enter it in.
- To reset the pin number see trouble-shooter, 'How to set PIN code'.
The LED on the above button is flashing blue and the robot returns to the station.
- Outside of the active mowing time, press the hour button.
- The LED should just remain blue and the robot should work normally.
The LED is red because the robot thinks it is off the ground.
- Check the underside for any blockages and remove.
- The LED should go off.
- If the LED remains red, do a factory reset on the mower (see: 'How to factory reset').
The LED is red and the mower returns to the station.
- The battery is empty and needs to charge.
- The mower should return to the station and start charging. This can be identified by a flashing blue light when docked with charging station.
Related articles
How do I set the Pin Code on my Robot Mower