Quick Answer

The Wi-Fi LED on your Compact or i600 robot lawnmower shows the current connection status between the mower and the mobile app.

  • Slow flashing LED – The mower is not connected to Wi-Fi.
  • Solid LED – The mower is ready to connect.
  • Fast flashing LED – The mower is connected to Wi-Fi.

Before You Begin

Before troubleshooting the Wi-Fi connection, check that:

  • Your mower is switched on.
  • Your Wi-Fi network is available.
  • You are within range of your Wi-Fi router.
  • The CloudHawk app is installed and you're signed in.
  • Your mobile device has Bluetooth and Wi-Fi enabled if required during setup.

Tip: Always check the CloudHawk app first, as it may provide additional information about the connection status.

Slow Flashing Wi-Fi LED

A slow flashing Wi-Fi LED indicates that the mower is not connected to a Wi-Fi network or cannot locate the configured network.

To reconnect:

  1. Press and hold the Wi-Fi button for approximately 5 seconds.
  2. Wait for the LED to change.
  3. If the LED becomes solid, the mower is ready to connect.

If the LED continues to flash slowly:

  • Check that your Wi-Fi network is available.
  • Move the mower closer to the router if possible.
  • Open the CloudHawk app and follow the connection prompts.


Solid Wi-Fi LED

A solid Wi-Fi LED means the mower is ready to be connected.

To complete the setup:

  1. Open the CloudHawk app.
  2. Select your mower.
  3. Follow the on-screen instructions to complete the connection.

Once connected successfully, the LED will begin flashing quickly.


Fast Flashing Wi-Fi LED

A fast flashing Wi-Fi LED indicates the mower is connected to the network.

If you're experiencing connection problems despite the LED flashing:

  1. Restart the mower.
  2. Reopen the CloudHawk app.
  3. Check that the mower appears online.
  4. Confirm your phone is connected to the internet.


Frequently Asked Questions

What does a slow flashing Wi-Fi LED mean?

The mower cannot connect to your Wi-Fi network or has not yet been connected.

What does a solid Wi-Fi LED mean?

The mower is ready to connect to the CloudHawk app.

What does a fast flashing Wi-Fi LED mean?

The mower is successfully connected to the Wi-Fi network and should be available in the CloudHawk app.

My mower still won't connect.

If the Wi-Fi LED status appears correct but the mower does not connect:

  • Check the CloudHawk app for connection errors.
  • Restart both the mower and your mobile device.
  • Confirm your Wi-Fi network is working correctly.
  • Repeat the connection process if necessary.

Which models use this Wi-Fi indicator?

This guide applies to Compact and i600 robot lawnmower models with a built-in Wi-Fi indicator on the control panel.