Quick Answer

If you have accidentally cut or damaged the power cable on your electric lawnmower, stop using the product immediately and disconnect it from the mains power supply. The mower must not be used again until the cable has been professionally inspected or repaired.

Important: A damaged power cable is a serious safety risk and must not be used under any circumstances.

Important Information

Damage to the power cable is considered accidental user damage.

This means:

  • The product warranty will be invalidated
  • Repairs are not covered under standard warranty terms
  • Safety responsibility transfers to the user once damage has occurred

What You Should Do

1. Stop using the mower

Do not attempt to switch the mower back on or test it.

2. Do not attempt a DIY repair

Do not:

  • Tape the cable
  • Join or splice the cable
  • Attempt electrical repairs yourself

This can create a serious electrical hazard.

3. Arrange a safe repair

A qualified electrician may be able to repair the cable safely.

Please note:

  • Any repair work will be at your own cost
  • Repairs must meet electrical safety standards

Important Safety Information

  • Never use a lawnmower with a damaged power cable
  • Do not attempt temporary fixes such as insulation tape
  • Always ensure cables are fully intact before use
  • Keep cables away from cutting blades during operation

Frequently Asked Questions

Can I still use my lawnmower if the cable is slightly damaged?

No. Any damage to the power cable means the mower must not be used.

Can I repair the cable myself?

No. Electrical repairs should only be carried out by a qualified electrician.

Does this damage affect my warranty?

Yes. Cutting or damaging the power cable is considered user damage and will invalidate the warranty.

Can I replace the cable?

In some models with detachable extension cables, a replacement may be possible. Otherwise, a qualified repair is required.

What should I do next?

Disconnect the mower from the mains immediately and arrange a professional repair or contact our Technical Support Team for guidance.