Overview

The Cordless Blower Vac is a versatile garden tool that can be used in both blower and vacuum modes to clear leaves and garden debris efficiently. Before first use, the unit must be correctly assembled, the battery fully charged, and all components securely fitted.


This guide explains how to assemble the tool, charge the battery, and safely start and operate your Cordless Blower Vac.


Step-by-Step Guide

Step 1: Assemble the Blower Vac

  • Insert the suction pipe into the main unit.
  • Secure it firmly by screwing it into place.
  • Attach the shoulder strap to the mounting points on the device for comfortable use.

Step 2: Charge the Battery

Before use, ensure the battery is fully charged.

Important Notes:

  • Always remove the battery once charging is complete.
  • Fully charge the battery before first use.
  • Only use the original 20V battery pack.
  • Ensure the charger matches the mains voltage rating.

Charging Process:

  1. Plug the charger into a mains power outlet.
    • The red LED will illuminate.
  2. Align the battery ribs with the charger grooves.
  3. Insert the battery firmly into the charger.
  4. The red LED remains on and the green LED flashes during charging.
  5. When fully charged:
    • The charger shows a solid green light.
  6. Press the battery release button and remove the battery.

Step 3: Safety Check Before Starting

Before switching on the blower vac:

  • Check that there are no visible faults or damage.
  • Ensure all parts are fitted securely.
  • Inspect for cracks, broken parts, or loose fittings.
  • Do not operate the device if any defects are found.

Step 4: Insert the Battery

  • Align the grooves on the battery with the device slot.
  • Push the battery into place with moderate force.
  • Ensure it clicks and locks securely.

Step 5: Attach the Collection Bag (Vacuum Mode Only)

  • Hook the front of the collection bag onto the unit.
  • Insert the nozzle fully into the connection point.
  • Ensure the bag is firmly seated and secure.

Step 6: Select Operation Mode

  • Use the adjustment lever to select:
    • Vacuum mode (A) for collecting leaves and debris
    • Blower mode (B) for blowing debris away

Mode Switching Notes:

  • Vacuum mode: collection bag must be attached.
  • Blower mode: press the release button and remove the collection bag.

Step 7: Switch the Product On/Off

  • Turn the On/Off switch to positions 1–5 to start the machine.
  • Select the desired speed level within this range.
  • Turn the switch to 0 to switch the machine off.

Step 8: Adjust Speed

  • Use the On/Off switch settings to control blowing or vacuum power.
  • Lower settings are suitable for light debris.
  • Higher settings provide stronger airflow or suction.