Quick answer
If warning lights or LED panel errors appear on your robot mower, the LED indicators can help identify the issue and the action required.
Common warnings include:
- Lock button flashing red
- Working time button flashing blue
- Lift indicator showing red
- Battery indicator showing red
- Signal indicator flashing red while charging
Follow the steps below to understand each warning and resolve the issue.
Before you begin
Before checking the LED indicators:
- Make sure the robot mower is switched on
- Check that the mower is safely positioned on a flat surface
- Remove any visible grass, debris, or blockages from around the mower
- Check that the charging station has power
The lock button LED is flashing red rapidly and/or no buttons respond
If the lock button LED is flashing red and the mower does not respond:
- If this is the first time starting the robot mower, press the lock button four times.
- The lock button LED should turn off, confirming the mower has been unlocked.
- If you have previously set a PIN code, enter the correct PIN to access the mower functions.
If you have forgotten your PIN code, refer to the guide on how to reset the PIN code.
The working time button LED is flashing blue and the robot mower returns to the docking station
A flashing blue working time LED usually means the mower is outside of its programmed working schedule.
To resolve this:
- Check the mower working time settings.
- Press the working time button outside of the scheduled mowing period.
- Confirm the LED remains blue.
- The mower should then continue normal operation.
The lift indicator LED is red
If the lift indicator is red, the mower may detect that it has been lifted from the ground.
To resolve this:
- Turn off the robot mower.
- Check underneath the mower for any blockages or debris.
- Remove any grass build-up or objects preventing normal operation.
- Restart the mower.
If the LED remains red after these checks, perform a factory reset.
The battery indicator LED is red and the mower returns to the docking station
A red battery indicator means the battery level is low.
The robot mower will automatically return to the docking station to recharge, even if it is still within its scheduled working time.
To resolve this:
- Allow the mower to return to the docking station.
- Check that the charging connection is correct.
- Allow the mower to charge.
Charging indicators:
- Flashing charging LED: The mower is charging
- Constant charging LED: The battery is fully charged
The signal indicator LED is flashing red while the mower is in the docking station
This is normal operation.
When the robot mower enters the docking station, it is considered outside of the mowing area. The signal indicator may flash red while charging.
The mower will continue charging and operate normally once ready.
Frequently Asked Questions
Why is my robot mower LED flashing red?
A flashing red LED can indicate different issues depending on which LED is showing the warning. Check the specific LED indicator above for the correct solution.
Why is my robot mower not responding to buttons?
If the lock button LED is flashing red, the mower may be locked. Press the lock button four times or enter your PIN code if one has been set.
Why does my robot mower return to the docking station when the battery is not empty?
The mower may return to the docking station when it detects a low battery level or when it reaches the end of its programmed working time.
Is a red signal LED normal when my robot mower is charging?
Yes. A flashing red signal LED while the mower is in the docking station is normal because the mower is outside the defined mowing area.
What should I do if the LED warning remains after troubleshooting?
If the LED warning continues after completing the recommended checks, contact our support team through live chat for further assistance.