MB400 CloudHawk App Operation

Overview

The MB400 robotic mower uses the CloudHawk App to allow users to set up, control, and monitor the mower from a smartphone.

To operate the MB400 successfully, the mower must first be registered, linked to your account, and connected via Bluetooth. After installation, the app becomes the central control system for everyday use, including scheduling and monitoring.


Please find a video walk through:



Step 1: Download and Access the App

  • Download the Cloudhawk app.
  • Agree to the terms
  • Select ‘Get Started’


Step 2: Register & Create an Account for the MB400

  1. Click ‘Register’.
  2. Enter your email address.
  3. Click ‘Send Code’ to receive a verification code via email.
  4. Enter a new password ‘twice’ and click ‘Next’.


Step 3: Verify Your Email

  1. Check your inbox for a verification email.
  2. Click the verification link to activate your account.
  3. If not received, check spam/junk folders.
  4. Select Country and choose ‘User Name’

 

Step 6: Connect the MB400 

  1. Allow Cloudhawk to find, connect to and determine the relative position of nearby devices – Click ‘Allow’.
  1. Location Permissions Needed – Click ‘OK’.
  2. Confirm successful connection status.


Step 8: Add the MB400 robot lawnmower

  1. Click + to add MB400.
  2. Select Bluetooth if you have a Bluetooth Phone.
  3. Enter ‘Serial Number’ (found on the sticker on rear of device above the QR code or in the app Click on QR code icon to scan).
  4. Allow the app permission to use your camera
  5. Ensure both Bluetooth & Location services are enabled. Click ‘continue’
  6. Turn on the mower using the key on the rear of machine and Click ‘Search’.
  7. Once paired you will get a confirmation message.
  8. Your mower will appear under ‘My Devices’ tab.
  9. Green indicator shows the robotic mower is online and ready to access.
  10. Click on the image to manger the robotic mower.


Step 9: Operating the MB400

  • ‘Connected’ will be displayed top right of screen.
  • Click on ‘Modify Schedule’.
  • Click + to add a cutting time range
  • Schedule a start time on the relevant day.
  • Schedule an end time on the relevant day. (You are able to schedule up to two sessions per day)
  • Repeat until you have completed the entire week.
  • Save Schedule
  • Click ‘back arrow’ to return to home screen.
  • Use the function keys at the bottom of the app for direct control instant to start and stop mowing.